SBA wants to change who counts as small in 338 industries: check if you still do
On August 20, 2026 the U.S. Small Business Administration proposed new size standards for 338 industry groups and industries, replacing the 978 six-digit standards in force today with one standard per 4- or 5-digit NAICS group, most of them measured in employees instead of dollars. Comments are open until November 20, 2026. Nothing has changed yet: the table in force is still 13 CFR 121.201. But if the rule is finalized, about 114,541 more businesses become small, including 37,002 firms that already hold federal contracts, and they will be bidding on the same set-asides you are.
Key dates and documents. Proposed rule: 91 FR 53741, August 20, 2026, RIN 3245-AI67, docket SBA-2026-0199. Methodology notice: 91 FR 54096, same day, docket SBA-2026-0265. Original comment deadline: September 21, 2026. Extension of 60 days published September 24, 2026 (91 FR 60524): comments on both documents must be received on or before November 20, 2026. We read the three notices on the Federal Register on October 27, 2026.
Today, November 22, 2026: SAM.gov has 11,692 open federal notices. 3,298 carry a total or partial small business set-aside, and 3,936 of all open notices close within 7 days. Every one of those set-asides is decided by the size standard of its NAICS code. Browse the open small business set-asides by state and code.
What SBA is proposing
SBA reviews every size standard at least once every five years under the Small Business Jobs Act of 2010. This is the third review (the first ended in 2016, the second in 2023), and it is not a tune-up: the whole table at 13 CFR 121.201 would be rewritten. The comparison below is SBA's own, from the proposed rule.
| Item | Today (13 CFR 121.201) | Proposed |
|---|---|---|
| Number of size standards | 978 at the 6-digit NAICS level (102 different levels) | 338: 276 at the 4-digit level and 62 at the 5-digit level |
| Measured in annual receipts | 496 industries (plus 13 exceptions) | 129 standards |
| Measured in employees | 477 industries (plus 5 exceptions) | 208 standards |
| Subindustry exceptions (for example the $47 million engineering exception for military and aerospace work) | 18 | No exceptions |
| Maximum size standard | $47 million in receipts or 1,500 employees | No maximum |
| Minimum size standard | Varies by industry | 500 employees, or $30.6 million in receipts |
| Businesses that count as small | 6,344,967 | 6,459,508 (close to 2% more) |
Five changes in the method explain the new numbers, and SBA lists them in that order:
- Standards set at the 4- or 5-digit NAICS level, not the 6-digit code. The 6-digit codes still exist for classifying contracts; they just share the standard of their group. All exceptions go away.
- Employees by default, not receipts. Under the 2024 method SBA used receipts unless an industry was manufacturing or met certain conditions. The new method defaults to employees wherever SBA has discretion, so that inflation and growth do not push a firm in and out of small status from year to year.
- Three factors instead of seven. National industry size, number of geographic markets and an adjustment for net imports, combined into an "average market size". SBA says this tracks the Small Business Act's test of a firm "not dominant in its field of operations" more closely than the old seven factors.
- One formula, no ceiling. The average market size is converted into a size standard by a single function, with a floor but no cap. That is why some proposed figures are many times the current ones.
- A productivity adjustment on top of inflation for the standards still measured in dollars.
What it looks like for construction and services codes
Here is the change for the NAICS codes that carry most of the small business set-asides on SAM.gov. The current column is the table in force at 13 CFR 121.201 (eCFR, October 23, 2026 edition); the proposed column is the table printed in the proposed rule (Federal Register pages 53776 to 53784). Receipts are average annual receipts in millions of dollars.
| Your 6-digit code today | Current standard | Proposed group | Proposed standard |
|---|---|---|---|
| 236220 Commercial and institutional building construction | $45.0 million | 2362 Nonresidential building construction | 600 employees |
| 236210 Industrial building construction | $45.0 million | 2362 Nonresidential building construction | 600 employees |
| 237310 Highway, street and bridge construction | $45.0 million | 2373 Highway, street and bridge construction | 700 employees |
| 237110 Water and sewer line construction | $45.0 million | 23711 Water and sewer line and related structures | 700 employees |
| 238110 Poured concrete foundation and structure contractors | $19.0 million | 2381 Foundation, structure and building exterior contractors | 650 employees |
| 238160 Roofing contractors | $19.0 million | 2381 Foundation, structure and building exterior contractors | 650 employees |
| 238210 Electrical contractors | $19.0 million | 23821 Electrical contractors and other wiring installation | 550 employees |
| 238220 Plumbing, heating and air-conditioning contractors | $19.0 million | 23822 Plumbing, heating and air-conditioning contractors | 550 employees |
| 238990 All other specialty trade contractors | $19.0 million | 2389 Other specialty trade contractors | 550 employees |
| 541310 Architectural services | $12.5 million | 54131 Architectural services | $135 million |
| 541330 Engineering services | $25.5 million ($47.0 million exception for military and aerospace work) | 54133 Engineering services | $252 million |
| 541511 Custom computer programming / 541512 Computer systems design | $34.0 million | 5415 Computer systems design and related services | $531 million |
| 541611 Administrative and general management consulting | $24.5 million | 5416 Management, scientific and technical consulting | $295 million |
| 561210 Facilities support services | $47.0 million | 5612 Facilities support services | $156 million |
| 561612 Security guards and patrol services | $29.0 million | 5616 Investigation and security services | $186 million |
| 561720 Janitorial services | $22.0 million | 5617 Services to buildings and dwellings | $58 million |
| 561730 Landscaping services | $9.5 million | 5617 Services to buildings and dwellings | $58 million |
Two things stand out. Construction moves from dollars to headcount: a general contractor with $60 million in average receipts is not small today under 236220, but with 200 employees it would be small under 2362. And the professional services codes jump by a factor of five to fifteen: an engineering firm with $200 million in receipts would be small. Those are the firms SBA counts as the 37,002 contract holders becoming newly small.
Who gains and who loses
- Net gain of about 114,541 small businesses. SBA estimates 37,002 unique firms with FY 2025 federal contracts become newly small; together they held 105,655 contracts worth roughly $71 billion that year.
- Almost nobody loses small status. SBA is proposing not to reduce any standard that keeps the same measure, even where its method produced a lower figure (45 industry groups or industries). The only industry expected to see a loss is NAICS 524126, direct property and casualty insurance carriers, with fewer than 5 firms affected.
- More competition inside the set-asides. SBA's own analysis says that with close to 2% more firms qualifying as small, "there is likely to be an increase in competition for small business government contracts which may impact firms qualifying under the current size standards by reducing their likelihood of winning." If you are a 30-person specialty contractor bidding on total small business set-asides today, your new competitors under the proposal could be firms with 500 employees.
- Firms that outgrew the standard get back in. SBA describes a "benefit cliff" at the current limits and says the proposal pushes it out, so firms can grow and keep bidding on set-asides.
How to check your own NAICS codes
- List your codes. They are in your SAM.gov registration (primary NAICS and any others you added). If you are not sure which codes agencies use for your work, start with NAICS codes for contractors and the NAICS pages on BidFox, which show the open notices and set-asides per code.
- Find your current standard. Look up each 6-digit code in 13 CFR 121.201 on eCFR. That is the figure that applies to every bid you submit today and until a final rule takes effect.
- Find your proposed standard. Take the first 4 digits of your code (or 5, where the proposed table lists a 5-digit group) and look it up in the table at the end of the proposed rule, pages 53776 to 53784. Note whether the measure changed from receipts to employees.
- Measure yourself the way SBA does. Receipts are average annual receipts over your most recently completed 5 fiscal years, including affiliates (13 CFR 121.104). Employees are the average over the last 24 months, counting full-time, part-time, temporary and leased staff and affiliates (13 CFR 121.106).
- Decide whether to comment. If the proposed standard for your group would let much larger firms into your set-asides, or if your industry was moved to a measure that does not fit it, say so with data before November 20, 2026. Comments go to regulations.gov under docket SBA-2026-0199 (the standards) or SBA-2026-0265 (the method), or by mail to the address in the FAQ below. SBA posts all comments publicly.
- Keep bidding on today's rules. Set-asides between $15,000 and $350,000 are reserved for small businesses under the current table; see federal contracts from $15,000 to $350,000 are reserved for small businesses. If a final rule later makes you small again, or newly small, you will want a SAM.gov registration already active and a record of quotes: see SAM.gov registration and small business set-asides, explained.
Frequently asked questions
Is this already the law?
No. It is a proposed rule (91 FR 53741, August 20, 2026). SBA is collecting comments until November 20, 2026 and would then have to publish a final rule. Until that happens the size standards in force are the ones in the current table at 13 CFR 121.201, and that is the table SAM.gov and contracting officers use today.
Can my size standard go down?
SBA says it is adopting a policy of not reducing any size standard that keeps the same measure (receipts or employees). Its own method produced a lower figure for 45 industry groups or industries, but the proposal keeps those at today's level. The one exception is NAICS 524126, direct property and casualty insurance carriers, which would move from 1,500 employees to $842 million in receipts; SBA expects fewer than 5 firms there to lose small status.
Do I have to do anything in SAM.gov now?
Not yet. Nothing changes until a final rule is published. SBA notes in the proposal that businesses must register in SAM and self-certify that they are small at least once a year, and that registration and certification are free. If the rule is finalized, your next annual SAM.gov update is where the new standard would apply to you.
What happens to the exceptions, like the $47 million standard for military and aerospace engineering?
The proposal removes all 18 subindustry exceptions. Every business would be measured against the one standard for its 4- or 5-digit NAICS group. For engineering (54133) that proposed standard is $252 million in receipts, well above both the general $25.5 million and the $47 million exception in force today.
When would the new size standards take effect?
The proposed rule does not set an effective date. A final rule, if SBA issues one, would say when the new table replaces the current one. SBA's last broad change, the inflation adjustment, took effect December 19, 2022.
Where do I send a comment?
At regulations.gov, under docket SBA-2026-0199 for the size standards themselves (RIN 3245-AI67) or docket SBA-2026-0265 for the methodology, or by mail to Ryan Lambert, Associate Administrator, Office of Industrial Base Resilience & Contracting, 409 Third Street SW, Mail Code 6530, Washington, DC 20416. SBA must receive comments on or before November 20, 2026.
See the set-asides in your codes the day they post
Whatever SBA decides, the jobs reserved for small businesses are posted on SAM.gov with short deadlines. BidFox checks every notice each morning and emails you the new ones for your trade and states, with the set-aside, the NAICS code and the deadline on top. See a free sample alert, browse today's new notices, or the open small business set-asides by state.
Sources: Small Business Size Standards, proposed rule, 91 FR 53741 (August 20, 2026, FR Doc. 2026-17042, RIN 3245-AI67, docket SBA-2026-0199); Small Business Size Standards: Revised Size Standards Methodology, 91 FR 54096 (August 20, 2026, FR Doc. 2026-17039, docket SBA-2026-0265); Small Business Size Standards, extension of comment periods, 91 FR 60524 (September 24, 2026, FR Doc. 2026-19546); 13 CFR 121.201, 121.104 and 121.106 as published on eCFR (October 23, 2026 edition). All read on October 27, 2026. Counts of open notices from SAM.gov public data as processed by BidFox.
Last reviewed October 27, 2026. This guide is general information, not legal advice. Rules and dollar thresholds change, so check the solicitation and the official sources linked above.